Recommended lubricants and capacities

To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy.

The following lubricants and fluids are recommended for use in your vehicle.

Lubricant		Volume	Classification
Engine oil*1*2 (drain and refill) Recommends		3.8 ℓ	SAE 5W-30, ACEA A5/B5*3
Dual clutch transmission fluid		1.6-1.7 ℓ	HK D DCTF TGO-10 PLUS (SK), SPIRAX S6 GHDE 70W DCTF PLUS (SHELL), HYUNDAI Genuine DCTF 70W SYNTHETIC PLUS
Engine coolant		7.2 ℓ	Mixture of antifreeze and distilled water (Ethylene glycol base coolant for aluminium radiator)
Brake fluid*4		As needed	DOT-4
Rear differential oil		0.4-0.5 ℓ	HYPOID GEAR OIL API GL-5, SAE 75W/85(SK HCT-5 GEAR OIL 75W/85 or EQUIVALENT
Fuel		38 ℓ	Refer to the “Fuel requirements” section in chapter 1.
Engine clutch actuator fluid		As required	SAE J1704 DOT-4LV/FMVSS 116 DOT-4/ISO4926 CLASS-6

Refer to the “Recommended SAE viscosity number” in this section.

Engine oils labelled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost and energy savings.

Requires <API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade engine oil (mineral oil including semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.

To maintain the best braking performance and ABS/ESC performance, we recommend that you use genuine brake fluid that conform to specifications.