Regenerative braking system full stop function

Pull and hold the left paddle shifter (-) for over about 0.4 seconds to bring the vehicle to a full stop.

The regenerative braking intensity level appears as "MAX" on the instrument cluster whilst decelerating, and appears as "STOP" when the vehicle stops.

Using regenerative braking system full stop function

Pull the left paddle shifter (-) whilst coasting.

When the regenerative braking level is at STOP, the vehicle keeps applying the brake although the driver releases the left paddle shifter (-).

Press the accelerator pedal to restart the vehicle when the regenerative braking level is at STOP.
If the brake pedal is pressed with the regenerative braking level in MAX, MAX level is maintained regardless of pulling the paddle shifter (the regenerative braking level changes to STOP when the vehicle is stopped).

Regenerative braking system full stop function does not control the distance with the vehicle ahead.
Depending on the vehicle and road condition, the vehicle may not come to a stop although the regenerative braking system full stop function is active. Check surroundings and press the brake pedal to control the vehicle speed.
Always maintain a safe distance from the vehicles ahead and reduce your vehicle speed as needed
The regenerative braking system full stop function is not a substitute for safe driving practices. Always monitor the speed and the distance to the vehicle ahead of you.