+ -

Power windows

The Start/Stop button must be in the ON position to be able to raise or lower the windows. Each door has a power window switch to control the door's window. The driver has a Power Window Lock button that can block the operation of rear passenger windows. The power windows operate for about 3 minutes after the Start/Stop button is in the ACC or OFF position. If the front doors are opened, the battery power is turned OFF and the power windows do not operate.

Window opening and closing

2C_WindowAutoReverse

To open:

Press the window switch down to the first detent position (1). Release the switch when you want the window to stop.

To close:

Pull the window switch up to the first detent position (1). Release the window switch when you want the window to stop.

Auto up/down window

Pressing the power window switch momentarily to the second detent position (2) completely lowers or lifts the window even when the switch is released. To stop the window at the desired position while the window is operating, pull up or press down and release the switch.

  • Do not leave the vehicle running and the key in your vehicle with unsupervised children. Unattended children could operate the window, which could result in serious injury.

  • Do not extend your head, arms or any other body parts or objects outside the window while driving to avoid serious injury.

Resetting the power windows

If the power windows do not operate normally, the automatic power window system must be reset as follows:

  1. Press the Start/Stop button to the ON position.

  2. Close the window and continue pulling up on the power window switch for at least one second.

If the power windows do not operate properly after resetting, we recommend that you contact an authorized HYUNDAI dealer.

Make sure body parts or other objects are out of the way before closing the windows. The automatic reverse feature does not operate while resetting the power window system.

Automatic reversal

2C_WindowEmergencyStop

If a window senses any obstacle while it is closing automatically, it stops and lowers to allow the object to be cleared.

  • The automatic reverse feature is active only when the "Auto Up" feature is used by fully pulling up the switch to the second detent.

  • The automatic reverse feature is unactive when the object's resistance is below a certain level, or if you pulling up the switch to the first detent.

  • If the window detects any resistance while the power window switch is pulled up continuously, the window stops upward movement and then lowers about 2.5 cm (1 in.).

  • If the power window switch is pulled up continuously again within 5 seconds after the window is lowered by the automatic window reverse feature, the automatic window reverse does not operate.

    Please use with caution.

Do not install any accessories on the windows. The automatic reverse feature may not operate normally.

Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage.

Objects less than 4 mm (0.16 in.) in diameter caught between the window glass and the upper window channel may not be detected by the automatic reverse window and the window does not stop and reverse direction.

Power window lock button

2C_ChildProtectRearDoorLockButton

The driver can disable the power window switches on the rear passenger doors by pressing the power window lock button.

When the power window lock button is pressed:

  • The driver's master control can operate all the power windows.

  • The front passenger's control can perate the front passenger's power window.

  • The rear passenger's control cannot operate the rear passenger's power window.

Do not allow children to play with the power windows. Keep the driver's door power window lock button in the LOCK position. Serious injury or death may result from unintentional window operation by a child.

  • To prevent possible damage to the power window system, do not open or close two windows or more at the same time. This also ensures the longevity of the fuse.

  • Never try to operate the main switch on the driver's door and the individual door window switch in opposite directions at the same time. If this is done, the window stops and cannot be opened or closed.

Remote window opening/closing feature

2C_RemoteWindowOpenButton

  • Press and hold the door lock button (1) for more than 3 seconds and the front windows move up after the doors are locked. Window movement stops when you release the door lock button.

  • Press and hold the door unlock button (2) for more than 3 seconds and the front windows move down after the doors are unlocked. Window movement stops when you release the door unlock button.

  • The Remote window opening/closing feature can be turned on and off in the infotainment system. Press the Ų button, and the select Door > Remote window control to on or off.

  • The remote window opening/closing feature operates only with the Safety Power Windows equipped.

  • The remote window opening/closing feature may abruptly stop when you move away from your vehicle during operation. Stay in close proximity from your vehicle, while monitoring the window movement.

  • One of the windows may stop operating when the window is interrupted by certain force. However, the other windows keep operating. Make sure that all windows are closed.

  • The doors unlock when the windows are opened using the remote window open/closing feature.

Always double check to make sure arms, hands, head and other obstructions are safely out of the way before using remote window closing feature.

Do not leave the windows down when leaving the vehicle to prevent theft or damage from water entering the vehicle.