+ -

Manual Speed Limit Assist operation

Setting speed limit

  1. Press and hold the Driving Assist (ĩ) button at the desired speed. The Speed Limit (Ý) indicator will appear on the cluster.

    2C_DrivingAssistButton

  2. Push the î switch up or ï switch down, and release it at the desired speed.

    • A short push of the switch upward or downward will increase or decrease the set speed by 1 km/h (1 mph).

    • A long push of the switch upward or downward will increase or decrease the set speed by 10 km/h (5 mph).

    2C_SCCSpeedUp

    2C_SCCSpeedDown

  3. The set speed limit will be displayed on the cluster.

    If you would like to drive over the preset speed limit, depress the accelerator pedal beyond the pressure point to activate the kickdown function.

    The set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit.

When the accelerator pedal is not depressed beyond the pressure point, vehicle speed will maintain within the speed limit.

Temporarily pausing Manual Speed Limit Assist

2C_MSLAPausing

Press the ç switch to temporarily pause the set speed limit. The set speed limit will turn off but the Speed Limit (Ý) indicator will stay on.

Resuming Manual Speed Limit Assist

2C_SpeedControlResuming

To resume Manual Speed Limit Assist after the function was paused, operate the î, ï, ç switch.

If you push the î switch up or ï switch down, vehicle speed will be set to the current speed on the cluster.

If you press the ç switch, vehicle speed will resume to the preset speed.

Turning off Manual Speed Limit Assist

2C_DrivingAssistButton

Press the Driving Assist (ĩ) button to turn Manual Speed Limit Assist off. The Speed Limit (Ý) indicator will go off.

Always press the Driving Assist (ĩ) button to turn Manual Speed Limit Assist off when not in use.

Take the following precautions when using Manual Speed Limit Assist:

  • Always set the vehicle speed to the speed limit in your country.

  • Keep Manual Speed Limit Assist off when the function is not in use, to avoid inadvertently setting a speed. Check that the Speed Limit (Ý) indicator is off.

  • Manual Speed Limit Assist does not substitute for proper and safe driving. It is the responsibility of the driver to always drive safely and be aware of unexpected and sudden situations. Pay attention to the road conditions at all times.