+ -

View modes

View modes

Explanation

Driving Assist

This mode displays Driver Assistance system such as Lane Keeping Assist, Smart Cruise Control, and Lane Following Assist etc.

Turn by Turn

This mode displays the navigation guidance.

Utility

This mode displays driving information such as the trip distance, fuel economy and etc.

The information provided may differ depending on which functions are applicable to your vehicle.

Driving Assist mode

2C_DrivingAssistMode

LKA/SCC/LFA/HDA

Displays the state of Lane Keeping Assist, Smart Cruise Control, Lane Following Assist and Highway Driving Assist (if equipped). For more information, refer to each system information in chapter 7.

Turn by Turn (TBT) mode

2C_TurnByTurnMode

Turn-by-turn navigation and distance/ time to destination appear when Turn by Turn mode is selected.

Utility view

Current Trip

2C_DrivingInfo

The trip computer mode displays information related to vehicle driving parameters including fuel economy, tripmeter information, and vehicle speed.

Since Refueling

2C_InfoAfterRefuel

After the vehicle has been refueled, the trip distance, total driving time and average fuel economy appear.

To reset manually, press the OK button on the steering wheel for more than 1 second when "Since Refueling" appears.

Since Last Reset

2C_AccumulatedInfo

Accumulated trip distance, total driving time, and average fuel economy appear.

The information is accumulated starting from the last reset.

To reset manually, press the OK button on the steering wheel for more than 1 second when "Since Last Reset" appears.

Tire pressure

2C_TirePressureInfo

The tire pressure of each tire appears.

For more information, refer to the "Tire Pressure Monitoring System (TPMS)" section in chapter 8.

Driving force distribution (4WD)

2C_4WDInfo

Information related to 4WD driving force appears.

If the vehicle is in 4WD lock state, this mode is not displayed.

For more information, refer to the "Four wheel drive (4WD)" section in the chapter 6.

Additional information display

Driver Assistance

2C_ADASInfo

The current operation condition of Manual Speed Limit Assist, Smart Cruise Control, Lane Following Assist, etc. appears.

Master warning mode

Master warning light illuminates if one or more of the following occurs:

  • Forward Collision-Avoidance Assist malfunction

  • Forward Collision-Avoidance Assist radar blocked

  • Blind-Spot Collision-Avoidance Assist malfunction

  • Blind-Spot Collision-Avoidance Assist radar blocked

  • Rear Cross-Traffic Collision-Avoidance Assist malfunction

  • Rear Cross-Traffic Collision-Avoidance Assist radar blocked

  • Exterior light malfunction

  • LED headlight malfunction

  • High Beam Assist malfunction

  • Smart Cruise Control malfunction

  • Smart Cruise Control radar blocked

  • Lane Following Assist malfunction

  • Door/Liftgate malfunction

  • Low washer fluid

  • Tire Pressure Monitoring System (TPMS) malfunction