High Beam Assist operation

• After selecting High Beam Assist from the Settings menu to operate High Beam Assist:

  • Place the headlight switch in the AUTO position and push the headlight lever towards the instrument cluster. The High Beam Assist () indicator light illuminates.

  • When High Beam Assist is enabled, high beams turn on when the vehicle speed is above 18 mph (30 km/h) and the High Beam () indicator illuminates. When the vehicle speed is below 12 mph (20 km), high beams turn off and the indicator light illuminates in white.

• When High Beam Assist is operating:

  • If the turn signal lever is pulled toward you when the high beams are off, the high beams turn on. When you let go of the turn signal lever, High Beam Assist operates again.

  • If the turn signal lever is pulled toward you when the high beams are on by High Beam Assist, the low beams turn on and High Beam Assist turns off.

  • If the turn signal lever is pushed away from you, the high beams turn on and High Beam Assist turns off.

  • If the headlight switch is moved from AUTO to another position (headlight/position/off(O)), the corresponding light turns on and High Beam Assist turns off.

• When High Beam Assist is operating, high beam switches to low beam if:

  • The headlights of an oncoming vehicle are detected.

  • The tail lights of a front vehicle are detected.

  • The headlight or tail light of a motorcycle or a bicycle is detected.

  • The surrounding ambient light is bright enough so high beams are not required.

  • Streetlights or other lights are detected.

  • The vehicle speed drops below the threshold.