+ -

Removable towing hook

  1. Open the tailgate, and remove the towing hook (1) from the tool case.

    2C_TowingHook

  2. Remove the hole cover.

  3. Push the lower part of the bumper hole cover.

    • Push the upper part of the bumper hole cover.

    • Pull the lower part of the bumper hole cover.

  4. Install the towing hook by turning it clockwise into the hole until it is fully secured.

  5. Remove the towing hook and install the cover after use.

Failure to properly tighten the towing hook may result in vehicle damage and deformation of related parts.

Make sure the towing hook is tighten properly. If not, during towing the towing hook may be thrown off the vehicle resulting in serious injury or accident.