2C_OutsideDoorHandleButton

1. Close all doors, hood, and tailgate.

2. Have the smart key with you.

3. Press the door handle button or press the Door Lock button (1) on the smart key. The hazard warning lights blink.

4. Make sure the doors are locked by pulling the outside door handle.

2C_OutsideDoorHandleButton

1. Have the smart key with you.

2. Press the door handle button or press the Door unlock button (2) on the smart key. The hazard warning lights blink.

If the smart key is in the vehicle, and the door is locked with the central door lock/unlock button in the vehicle with a door open, the doors are not locked but unlocked again.

To start the vehicle remotely:

1. Press the door lock button on the smart key within about 10 m (32 ft.) from the vehicle.

2. Press the Remote Start button for more than 2 seconds within 4 seconds after pressing the door lock button.

3. The vehicle will start.

4. To turn off the remote start function, press the Remote Start button (3) once.

To unlock:

1. Carry the smart key.

2. Either press the tailgate handle button or press the Tailgate unlock button (4) on the smart key for more than one second.

3. The hazard warning lights will blink two times.

   Once the tailgate is opened and then closed, the tailgate will lock automatically.

If the Smart Key does not operate normally, you can lock or unlock the door by using the mechanical key.

2C_RemovingModifierKey

Move the release lever in the direction of the arrow (1) and then remove the mechanical key (2). Insert the mechanical key into the key hole on the door.

To reinstall the mechanical key, put the key into the hole and push it until a click sound is heard.

A maximum of two smart keys can be registered to a single vehicle. If you happen to lose your smart key, it is recommended that you should immediately take the vehicle and remaining key to your authorized HYUNDAI dealer or tow the vehicle, if necessary.

• The smart key may not work if any of the following occur:

  • The smart key is close to a radio transmitter such as radio station or airport that may interfere with normal operation of the transmitter.

  • The smart key is near a mobile two way radio system or a mobile phone.

  • Another vehicle's smart key is being operated close to your vehicle.

  • The smart key is near any normal electronic devices or credit cards.

  • The vehicle battery is discharged.

  • Connecting an external device to the power outlet and placing the smart key near the external device.

  If the smart key does not work correctly, open and close the door with the mechanical key. To start the vehicle, press the Start/Stop button directly with the smart key. If you have a problem with the smart key, we recommend that you contact an authorized HYUNDAI dealer.

  If the smart key is in close proximity to your mobile phone, the signal could be blocked by your mobile phone's normal operational signals. This is specifically relevant when the phone is active such as making and receiving calls, text messaging, and/or sending/receiving emails. When possible, avoid keeping the smart key and your smartphone in the same location such as a pants or jacket pocket to avoid interference between the two devices.

• If your windows are tinted, especially with metallic window tint, it may cause frequency interference, reducing the smart key operating range.

2C_ReplaceSmartKeyBattery

If the smart key is not working properly, try replacing the battery with a new one.

Battery type: CR2450

To replace the battery:

1. Remove the mechanical key.

2. Insert a flat head screwdriver into the inner groove to remove the smart key cover.

3. Remove the old battery and insert the new battery. Make sure the battery position is correct. An improperly positioned battery may discharge the battery, causing smart key failure.

4. Reinstall the rear cover of the smart key.

If you suspect your smart key might have sustained some damage or you feel your smart key is not working correctly, we recommended that you contact an authorized HYUNDAI dealer.