To prevent serious injury or death:

• Never disassemble the sensors or sensor assemblies, and never apply any impact on it.

• Only have the detecting sensor replaced or repaired by an authorized HYUNDAI dealer.

• Never install any accessories, stickers, or tint the front windshield.

• Always keep the camera dry.

• Never place any reflective objects (e.g. white paper, mirror) on the dashboard.

• Do not use any cleanser containing acid or alkaline detergents when cleaning the camera lenses. Use only a mild soap or neutral detergent, and rinse thoroughly with water.

• If there is impact on or near the sensor, the sensors may be damaged or not be properly aligned near the radar, even though a warning message does not appear on the instrument cluster, Driver Assistance system may not operate properly. Have the vehicle inspected by an authorized HYUNDAI dealer.

• Do not install a license plate frame or other objects such as bumper sticker, film, bumper guard, or bumper wrap near the radar.

• Driver Assistance system may not work properly if the bumper has been replaced, or the surroundings of the radar has been damaged or painted.

• If a trailer or hitch mounted carrier is attached, it may adversely affect the performance of the rear corner radar or Driver Assistance system may not operate.

• Always keep the ultrasonic sensors clean.

• Do not spray the ultrasonic sensors or the surrounding area directly with high pressure water.

• Do not apply objects such as bumper sticker or bumper guard, near the ultrasonic sensors or never apply paint to the bumper or other locations.

• Never disassemble or strike the ultrasonic sensors components.

• Do not modify the vehicle bumper height or ultrasonic sensor installations. Any non-factory installed equipment or accessories may also interfere with the sensor performance.

• If the ultrasonic sensors have been forcibly moved out of proper alignment or are damaged, have the vehicle inspected by an authorized HYUNDAI dealer.