+ -

Cluster display message

Press brake pedal to change gear

2C_PressureBreakPadalToChangeGearInfo

This message appears when the brake pedal is not depressed while shifting the gear.

Depress the brake pedal and then shift the gear.

Shift to P after stopping

2C_ShiftToPAfterStoppingInfo

This message appears when the gear is shifted to P (Park) while the vehicle is moving.

Stop the vehicle before shifting to P (Park).

Shifter system malfunction

2C_ShiftSystemMalfuncitonoInfo

This message appears when the transmission or the shift dial does not properly operate in the P (Park) position.

Have your vehicle inspected by an authorized HYUNDAI dealer.

Check shifter dial

2C_CheckShiftButtonInfo

This message appears when there is a malfunction with the rotary gear shift dial.

Have your vehicle inspected by an authorized HYUNDAI dealer.

Check P button

2C_CheckShiftPButtonInfo

This message appears when there is a problem with the P button.

Have your vehicle inspected by an authorized HYUNDAI dealer.

Rotary shifter stuck

2C_RotaryShifterStuckInfo

This message appears when the rotary gear shift dial does not return back to its normal position after rotating it.

Have your vehicle inspected by an authorized HYUNDAI dealer.

Transmission overheated warning

Transmission Hot! Park with engine on

2C_ShiftOverheatStopVehicleInfo

Repeated sudden acceleration and quick start may overheat the transmission. If the transmission is overheated, the self protection mode alarms the driver with an audible sound warning message.

Move the vehicle to a safe location and shift the gear to P (Park), and stop the vehicle with the engine on. Wait until the transmission is sufficiently cooled down.

Vehicle Power limited due to high transmission temperature

2C_ShiftOverheatPowerLimittedInfo

If you continue to drive with overheated transmission, the above warning message appears and self-protection mode restricts the power output of the vehicle.

  • Move the vehicle to a safe location and shift the gear to P (Park), and stop the vehicle with the engine on. Wait until the transmission is sufficiently cooled down.

  • If the above message is continuously displayed, contact an authorized HYUNDAI dealer.

Trans cooled. Resume driving

2C_ShiftOverheatCanDriveInfo

This message appears when the vehicle is safe to drive.