Recommended lubricants and capacities

To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy.

The following lubricants and fluids are recommended for use in your vehicle.

Lubricant		Volume	Classification
Engine oil*1*2 (drain and refill) Recommends		5.8 ℓ	SAE 0W-30 API SN PLUS/SP or ILSAC GF-6*4
Dual clutch transmission fluid	Gear oil	3.3 ℓ	SAE 70W, API GL-4, WDGO-1 GS WDCTF HD G (WET DCT FLUID)
	Control oil	2.45 ℓ	SAE 70W, API GL-4, WDHO-1 GS WDCTF HD H (WET DCT HYDRAULIC CONTROL OIL)
Coolant		8.8 ℓ	Mixture of antifreeze and distilled water (Ethylene glycol base coolant for aluminium radiator)
Brake fluid*3		As needed	DOT-4
Fuel		60 ℓ	Refer to the “Fuel requirements” section in chapter 1.

Refer to the “Recommended SAE viscosity number” in this section.

Engine oils labelled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost and energy savings.

To maintain the best braking performance and ABS/ESC performance, we recommend that you use genuine brake fluid that conforms to specifications.

Requires <API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade engine oil (mineral oil including semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated under severe maintenance conditions.