+ -

Manual Speed Limit Assist operation

Setting speed limit

  1. Press and hold Driving Assist () button at the desired speed. The Speed Limit () indicator appears on the instrument cluster.

    2C_SpeedControlButton

  2. Push the + switch up or - switch down, and release it at the desired speed.

    Push the + switch up or - switch down and hold it. The speed increases or decreases to the nearest multiple of 10 km/h at first, and then increase or decrease by 10 km/h.

    2C_SpeedControlSwitch

  3. The set speed limit appears on the instrument cluster.

    If you would like to drive over the preset speed limit, press the accelerator pedal beyond the pressure point to activate the kickdown function.

    The set speed limit blinks and chime sounds until you return the vehicle speed within the speed limit.

    2C_MSLASpeedLimitInfo

  • When the accelerator pedal is not pressed beyond the pressure point, vehicle speed is maintained within the speed limit.

  • A clicking sound may be heard from the kickdown function when the accelerator pedal is pressed beyond the pressure point.

Temporarily pausing Manual Speed Limit Assist

2C_MSLATemporarilyPausing

Press the switch to temporarily pause the set speed limit. The set speed limit turns off but the Speed Limit () indicator stays on.

Resuming Manual Speed Limit Assist

2C_SpeedControlResuming

To resume Manual Speed Limit Assist after the function was paused, operate the +, -, switch.

If you push the + switch up or - switch down, vehicle speed is set to the current speed on the instrument cluster.

If you press the switch, vehicle speed resumes to the preset speed.

Turning off Manual Speed Limit Assist

2C_SpeedControlButton

Press the Driving Assist () button to turn Manual Speed Limit Assist off. The Speed Limit () indicator goes off.

Always press the Driving Assist () button to turn Manual Speed Limit Assist off when not in use.

Take the following precautions when using Manual Speed Limit Assist:

  • Always set the vehicle speed to the speed limit in your country.

  • Keep Manual Speed Limit Assist off when the function is not in use, to avoid inadvertently setting a speed. Check that the Speed Limit () indicator is off.

  • Manual Speed Limit Assist does not substitute for proper and safe driving. It is the driver's responsibility to always drive safely and be aware of unexpected and sudden situations. Pay attention to the road conditions at all times.