+ -

Remote smart parking assist (RSPA)

Remote Smart Parking Assist uses the front, front side, rear side, and rear ultrasonic sensors to detect parking spaces and control vehicle steering, speed, gear shifts, and help enter and exit parking spaces remotely from outside your vehicle.

Function

Description

Remote Operation

Remotely moving forward or rearward

  • Remote Smart Parking and Remote Operation function may be operated from outside the vehicle using the smart key.

  • When Remote Smart Parking Assist operates, Parking Distance Warning and Surround View Monitor will also operate. For more information, refer to the “Forward/Reverse Parking Distance Warning (PDW)” and “Surround View Monitor (SVM)” sections in this chapter.

Detecting sensors

2C_CheckPDWSideInfo_2

2C_WideRearUltrasonicSensor

  1. Front ultrasonic sensors
  2. Front corner ultrasonic sensors
  3. Rear corner ultrasonic sensors
  4. Rear ultrasonic sensors

See the images above for the detailed location of the detecting sensors.

Take the following precautions to maintain optimal performance of the detecting sensors:

  • Never disassemble the detecting sensor or sensor assembly, or cause any damage to it.

  • If the detecting sensors need repair, we recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

  • Remote Smart Parking Assist may malfunction if the vehicle bumper height or ultrasonic sensor installation has been modified or damaged. Any non-factory installed equipment or accessories may also interfere with the sensor performance.

  • When the ultrasonic sensor is frozen or stained with snow, dirt, or water, the sensor may not operate until the stains are removed using a soft cloth.

  • Do not push, scratch, or strike the ultrasonic sensor. Sensor damage could occur.

  • Do not spray the ultrasonic sensors or the surrounding area directly with a high pressure washer.