+ -

Intelligent Speed Limit Assist operation

Warning and control

Intelligent Speed Limit Assist warns and controls the vehicle by “Displaying speed limit”, “Warning overspeed” and “Changing set speed”.

Displaying speed limit

2C_ISLASpeedLimitInfo

Speed limit information appears on the instrument cluster.

  • If speed limit information of the road cannot be recognised, “---” sign appears. Please refer to the “Limitations of Intelligent Speed Limit Assist” section in this chapter if the road signs are difficult to recognise.

  • Intelligent Speed Limit Assist provides additional road sign information in addition to speed limit. The additional road sign information provided may vary according to your area.

  • Supplementary sign displayed under the speed limit or overtaking restriction sign means the conditions under which the signs must be followed. If the supplementary sign is not recognised, it appears as blank.

  • The images and colours in the instrument cluster may differ depending on the instrument cluster type or theme selected from the instrument cluster.

Warning overspeed

2C_ISLAOverSpeedWarningInfo

When driving at a speed higher than the displayed speed limit, the red speed limit indicator blinks and warning sounds.

Changing set speed

2C_ISLAChangeSetSpeedInfo

If the speed limit of the road changes during the operation of Manual Speed Limit Assist or Smart Cruise Control, an arrow in the direction of up or down appears to inform the driver that the set speed needs to be changed. At this time, the driver can change the set speed according to the speed limit by using the + or - switch on the steering wheel.

Set Speed Auto Change (Navigation equipped)

2C_ISLASetSpeedAutoChangeInfo

Manual Speed Limit Assist or Smart Cruise Control assists the vehicle to adjust its speed according to the speed limit. When the cruising speed is set as same as the speed limit, the vehicle automatically adjusts its speed if the speed limit changes. The function operates on a road which has a speed limit of 70 km/h or higher. When the function is active, the cruising speed on the instrument cluster appears in green.

  • Even after changing the set speed according to the speed limit of the road, the vehicle can still be driven over the speed limit. If necessary, press the brake pedal to reduce your driving speed.

  • If the speed limit of the road is under 30 km/h, the set speed change function may not work.

  • Intelligent Speed Limit Assist operates using the speed units in the instrument cluster set by the driver. If the speed unit is not set to the speed unit used in your country, Intelligent Speed Limit Assist may not operate properly.