+ -

Instrument cluster display message

Press brake pedal to change gear

2C_PressureBreakPadalToChangeGearInfo

This message appears when the brake pedal is not pressed whilst shifting the gear.

Press the brake pedal and then shift the gear.

Shift to P after stopping

2C_ShiftToPAfterStoppingInfo

This message appears when the gear is shifted to P (Park) whilst the vehicle is moving.

Stop the vehicle before shifting to P (Park).

Shifting system error

2C_ShiftSystemMalfuncitonoInfo

This message appears when the transmission or the shift button does not properly operate in the P (Park) position.

We recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

Check rotary gear shift dial

2C_CheckShiftButtonInfo

This message appears when there is a malfunction with the rotary gear shift dial.

We recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

Check P button

2C_CheckShiftPButtonInfo

This message appears when there is a problem with the P button.

We recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

Rotary gear shift dial stuck

2C_RotaryShifterStuckInfo

This message appears when the rotary gear shift dial does not return back to it’s normal position after rotating it.

We recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

Transmission overheated warning

Transmission hot! Park with engine On

2C_ShiftOverheatStopVehicleInfo

Repeated sudden acceleration and quick start may overheat the transmission. If the transmission becomes overheated, the self protection mode alarms the driver with an audible sound warning message.

Move the vehicle to a safe location and shift the vehicle to P (Park), and stop the vehicle with the engine on. Wait until the transmission is sufficiently cooled down.

High transmission temperature. Power limited

2C_ShiftOverheatPowerLimittedInfo

If you continue to drive with an overheated transmission, the above warning message appears and self-protection mode restricts the power output of the vehicle.

  • Move the vehicle to a safe location and shift the vehicle to P (Park), and stop the vehicle with the engine on. Wait until the transmission is sufficiently cooled down.

  • If the above message continuously appears, we recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

Transmission cooled down. Resume driving

2C_ShiftOverheatCanDriveInfo

This message appears when the vehicle is safe to drive.