+ -

View modes

View modes

Explanation

Driving Assist

Driving Assist view displays the status of the vehicle’s Driver Assistance systems.

Turn by Turn

Turn By Turn view displays the state of the navigation.

Utility

Utility view displays driving information such as the trip distance, fuel economy, etc.

The information provided may differ depending on which functions are applicable to your vehicle.

Driving Assist mode

2C_DrivingAssistMode

Displays the status of Lane Keeping Assist, Smart Cruise Control, Lane Following Assist, etc.

For more information, refer to each system information section in chapter 7.

Turn By Turn (TBT) mode

2C_TurnByTurnMode

Turn-by-turn navigation, distance/time to destination information is displayed when Turn by Turn view is selected.

Utility view

In the Utility view, using the , switch, you may change through items in the following order.

Drive information

2C_DrivingInfo

Trip distance, average fuel economy and total driving time are displayed.

When the driver’s door is opened after turning off the vehicle or the vehicle is turned on after 3 minutes have passed, the Drive information screen will reset.

Since refuelling

2C_InfoAfterRefuel

Trip distance, total driving time and average fuel economy after the vehicle has been refuelled appears.

To reset manually, press and hold the OK button when “Since refuelling” appears.

Accumulated info

2C_AccumulatedInfo

Accumulated trip distance, the total driving time and average fuel economy appears.

The information is accumulated starting from the last reset.

To reset manually, press and hold the OK button when “Accumulated info” appears.

The vehicle must be driven for a minimum of 300 m since the last ignition cycle before the accumulated driving information is recalculated.

Tyre pressure

2C_TireLowPressureWarning

The tyre pressure of each tyre appears.

For more information, refer to the “Tyre pressure monitoring system (TPMS)” section in chapter 8.

Driving force distribution (4WD)

2C_4WDInfo

Information related to 4WD driving force appears.

If the vehicle is in 4WD lock state, this mode is not displayed.

For more information, refer to the “Four wheel drive (4WD)” section in the chapter 6.

Additional information display

Driver assistance

2C_ADASInfo

The current operation condition of Manual Speed Limit Assist, Smart Cruise Control, Lane Following Assist, etc. is displayed.

Master warning group

Master warning light informs the driver the following situations.

  • Forward Collision-Avoidance Assist malfunction

  • Forward Collision-Avoidance Assist radar blocked

  • Blind-Spot Collision-Avoidance Assist malfunction (if equipped)

  • Blind-Spot Collision-Avoidance Assist radar blocked (if equipped)

  • Rear Cross-Traffic Collision-Avoidance Assist malfunction (if equipped)

  • Rear Cross-Traffic Collision-Avoidance Assist radar blocked (if equipped)

  • Exterior light malfunction

  • LED headlamp malfunction (if equipped)

  • High Beam Assist malfunction (if equipped)

  • Smart Cruise Control malfunction (if equipped)

  • Smart Cruise Control radar blocked (if equipped)

  • Lane Following Assist malfunction (if equipped)

  • Door/Tailgate malfunction

  • Low washer fluid

  • Four Wheel Drive (4WD) malfunction

  • Tyre Pressure Monitoring System (TPMS) malfunction