+ -

Updating software

2C_OTAUpdate

You can see the progress of the update on the screen.

After the update is complete, you will receive a notification on your phone or the vehicle screen that the software update is complete.

The screen turns off automatically after 3 minutes to save the battery. If the screen turns off automatically, you can check the update progress by pressing the Start/Stop button.

  • After the update starts, you can exit the vehicle.

  • The OTA software update feature is only available on OTA enabled vehicles.

  • The update details may vary depending on the installed software version.

  • Check the HYUNDAI website for information on OTA software updates.

  • If the update fails, the update recovery will automatically proceed. If you want to retry the software update, even after a successful recovery, we recommend that you contact an authorised HYUNDAI dealer.

  • If the update or recovery fails, we recommend that you contact HYUNDAI Call Centre.

  • After the update is complete, it may provide new functions or improvements. For more information, please check the HYUNDAI website or scan the QR code on the screen.

  • Observe the following restrictions during the update.

    • You cannot use the vehicle during the update. Be sure to have enough time for the update, and safely park the vehicle before starting the update process.

    • You cannot use remote features, including remote start.

    • The Rear Occupant Alert feature may not work. Check if there are any occupants in the rear seat.

  • The update will be automatically cancelled if any vehicle conditions required for the update are changed before starting the update.

  • Once the update has started, you cannot cancel the update.

  • You cannot use the OTA software update feature if you modify or replace any vehicle software.

  • Do not open the bonnet or replace the battery in the vehicle during the update. The update may fail.

  • If a diagnostic tool of any kind is connected to the vehicle OBD (On-board Diagnostic) terminal, the vehicle cannot be updated. The vehicle can be updated by removing the diagnostic tool connected to the OBD terminal and then restarting the vehicle.

  • If the update is not completed successfully, we highly recommend that you contact an authorised HYUNDAI dealer.