+ -

Cluster display message

Press brake pedal to change gear

2C_PressureBreakPadalToChangeGearInfo

This message appears when the brake pedal is not pressed whilst shifting the gear.

Press the brake pedal and then shift the gear.

Shift to P after stopping

2C_ShiftToPAfterStoppingInfo

This message appears when the gear is shifted to P (Park) whilst the vehicle is moving.

Stop the vehicle before shifting to P (Park).

Shifting system error

2C_ShiftSystemMalfuncitonoInfo

This message appears when the transmission or the shift button does not properly operate in the P (Park) position.

We recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

Check rotary gear shift dial

2C_CheckShiftButtonInfo

This message appears when there is a malfunction with the rotary gear shift dial.

We recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

Check P button

2C_CheckShiftPButtonInfo

This message appears when there is a problem with the P button.

We recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

Rotary gear shift stuck

2C_RotaryShifterStuckInfo

This message appears when the rotary gear shift dial does not return back to it’s normal position after rotating it.

We recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

Vehicle will stay in (N). Change gear to cancel

2C_StayNAfterVehicleOffInfo

This message appears when pushing the “OK” button on the steering wheel after the message “Press and hold the OK button on the steering wheel to stay in Neutral” appears on the instrument cluster display. The gear stays in N (Neutral) position after turning off the engine.

Transmission overheated warning

Steep grade! Press brake pedal

2C_DCTWarningMessageInCluster

This message appears when the vehicle is driving up hills or on steep gradients.

If the vehicle is held or creeping forward on an incline by applying the accelerator pedal, the clutch and transmission may result in damage.

Press the brake pedal, if the messages appears on the instrument cluster display.

Transmission hot! Park with engine On

2C_ShiftOverheatStopVehicleInfo

Repeated sudden acceleration and quick start may overheat the transmission. If the transmission becomes overheated, the self protection mode alerts the driver with an audible sound warning message.

Move the vehicle to a safe location and shift the vehicle to P (Park), and stop the vehicle with the engine on. Wait until the transmission is sufficiently cooled down.

Vehicle Power limited due to high transmission tempreture

2C_ShiftOverheatPowerLimittedInfo

If you continue to drive with an overheated transmission, the above warning message appears and self-protection mode restricts the power output of the vehicle.

  • Move the vehicle to a safe location and shift the vehicle to P (Park), and stop the vehicle with the engine on. Wait until the transmission is sufficiently cooled down.

  • If the above message continuously appears, we recommend that your vehicle be inspected by an authorised HYUNDAI dealer.

Cooling... Remain parked for 00 min.

2C_DCTWarningMessageInCluster_3

If you move the vehicle to a safe location and shift the gear to P (Park) with the engine running, the above warning message appears.

  • Wait until the clutch is sufficiently cooled down.

Transmission cooled down. Resume driving

2C_ShiftOverheatCanDriveInfo

This message appears when the vehicle is safe to drive.