Recommended lubricants and capacities

To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy.

These lubricants and fluids are recommended for use in your vehicle.

Lubricant			Volume	Classification
Engine oil *1*2 Recommends (drain and refill)		Smartstream G2.5 GDI	5.8 ℓ (6.13 US qt.)	For Middle East*3India, Libya, Algeria, Morocco, Tunisia, Sudan, Egypt, Iran	SAE 5W-30/ACEA A5/B5*4
				Except Middle East, India, Libya, Algeria, Morocco, Tunisia, Sudan, Egypt, Iran	SAE 0W-20 API SN PLUS/SP or ILSACGF-6
		Smartstream G2.5 T-GDI		All	SAE 0W-30 API SN PLUS /SP or ILSAC GF-6 *5
Automatic transmission fluid		Smartstream G2.5 GDI	6.5 ℓ (6.8 US qt.)	SK ATF SP4-M1, MICHANG ATF SP4-M1, S-OIL ATF SP4-M1, Hyundai Genuine ATF SP4-M1
Dual clutch transmission fluid		Smartstream G2.5 T-GDI	Gear oil :3.3~3.4 ℓ (3.49~3.59 U.S qt.)	GS WDCTF HD G (WET DCT FLUID)
			Control oil : 2.45~2.5 ℓ (2.59~2.64 U.S qt.)	GS WDCTF HD H (WET DCT HYDRAULIC CONTROL OIL)
Coolant		Smartstream G2.5 GDI	8.7 ℓ (7.9 US qt.)	Mixture of antifreeze and distilled water(Ethylene glycol base coolant for aluminum radiator)
		Smartstream G2.5 T-GDI	8.8 ℓ (9.3 US qt.)
Brake fluid*6			As required	DOT-4
Fuel			60 ℓ (63.40 US qt.)	Refer to "Fuel requirements" in chapter 1.

Refer to the recommended SAE viscosity numbers on page Recommended SAE viscosity number.

Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost and energy savings.

Middle East includes Livia, Algeria, Iran, Morocco, Sudan, Tunisia and Egypt.

Requires <API Latest(ILSAC Latest) or ACEA A5/B5 Full synthetic> grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.

Requires < API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade engine oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.

To maintain the best braking performance and ABS/ESC performance, we recommend that you use genuine brake fluid that conform to specifications. (Standard : SAE J1704 DOT-4 LV, ISO4925 CLASS-6 and FMVSS 116 DOT-4).