Recommended lubricants and capacities
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy.
|
Lubricant |
Volume |
Classification |
|||
|
Engine oil *1*2 (drain and refill) Recommends 
|
Smartstream G2.5 GDI |
6.13 US qt. (5.8 ℓ) |
SAE 0W-20 API SN PLUS/SP or ILSAC GF-6*4 |
||
|
Smartstream G2.5 T-GDI |
SAE 0W-30 API SN PLUS /SP or ILSAC GF-6 *4 |
||||
|
Automatic transmission fluid |
Smartstream G2.5 GDI |
6.8 US qt. (6.5 ℓ) |
SK ATF SP4M-1, MICHANG ATF SP4M-1, S-OIL ATF SP4M-1, Hyundai Genuine ATF SP4M-1 |
||
|
Dual clutch transmission fluid |
Smartstream G2.5 T-GDI |
Gear oil :3.49~3.59 U.S qt. (3.3~3.4 ℓ) |
GS WDCTF HD G (WET DCT FLUID) |
||
|
Control oil : 2.59~2.64 U.S qt. (2.45~2.5 ℓ) |
GS WDCTF HD H (WET DCT HYDRAULIC CONTROL OIL) |
||||
|
Coolant |
Smartstream G2.5 GDI |
9.2 US qt. (8.7 ℓ) |
Mixture of antifreeze and distilled water(Ethylene glycol base coolant for aluminum radiator) |
||
|
Smartstream G2.5 T-GDI |
9.3 US qt. (8.8 ℓ) |
||||
|
Rear differential oil (AWD)*3 |
0.62 US qt. (0.58 ℓ) |
Hypoid gear oil API GL-5, SAE 75W/85 (SK HCT-5 75W/85 or equivalent) |
|||
|
Transfer case oil (AWD)*3 |
0.69 US qt. (0.65 ℓ) |
Hypoid gear oil API GL-5, SAE 75W/85 (SK HCT-5 75W/85 or equivalent) |
|||
|
Brake fluid*5 |
As needed |
DOT-4 |
|||
|
Fuel |
15.9 US gal. (60 ℓ) |
Refer to "Fuel requirements" in chapter 1. |
|||
Refer to the "Recommended SAE viscosity number" section.
Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year's time, they can offer significant cost and energy savings.
If the transfer case/rear differential is submerged, visit an authorized HYUNDAI genuine products to replace the transfer/differential oil.
Requires <API SN PLUS (or above) Full synthetic> grade engine oil. If a lower grade engine oil (mineral oil including semi-synthetic) is used, then the engine oil and engine oil filter must be replaced as indicated severe maintenance condition.
To maintain the best braking performance and ABS/ESC performance, use genuine brake fluid that conform to specifications.