Lighting Control

To operate the lights, turn the knob at the end of the control lever to one of the following positions:

B0177KO01

  1. OFF
  2. AUTO headlight
  3. Position lamp
  4. Headlight
Daytime Running Light (DRL)

The Daytime Running Lights (DRL) can make it easier for others to see the front of your vehicle during the day, especially after dawn and before sunset. The Daytime Running Lights (DRL) should be illuminated whenever you are driving during daylight hours. The DRL system will be ON when the headlight switch is in the OFF or the AUTO position (when daylight is detected) and the Electronic Parking Brake (EPB) is released.

The DRL system will turn off when:

  • The headlights are ON.

  • The parking brake is applied.

  • The vehicle is turned off.

  • The parking brake is engaged.

AUTO headlight

B0177KO02

The position lamp and headlight will be turned ON or OFF automatically depending on the amount of daylight as measured by the ambient light sensor (1) at the upper end of the windshield glass.

Even with the AUTO headlight feature in operation, it is recommended to manually turn ON the headlights when driving at night or in a fog, driving in the rain, or when you enter dark areas, such as tunnels and parking facilities.

  • Do not cover or spill anything on the sensor (1) located at the upper end of the windshield glass.

  • Do not clean the sensor using a window cleaner, the cleanser may leave a light film which could interfere with sensor operation.

  • If your vehicle has window tint or other types of metallic coating on the front windshield, the AUTO headlight system may not work properly.

Position lamp ()

B0177KO03

The position lamp, license plate lamp and instrument panel lamp are turned ON.

Headlight ()

B0177KO04

The headlight, position lamp, license plate lamp and instrument panel lamp are turned ON.

The ignition switch must be in the ON position to turn on the headlight.