Head Restraint
The vehicle’s front and rear seats have adjustable head restraints. The head restraints provide comfort for passengers, but more importantly they are designed to help protect passengers from whiplash and other neck and spinal injuries during an accident, especially in a rear impact collision.
To help reduce the risk of serious injury or death in an accident, take the following precautions when adjusting your head restraints:
-
Always properly adjust the head restraints for all passengers BEFORE starting the vehicle.
-
NEVER let anyone ride in a seat with the head restraint removed or reversed.
-
Adjust the head restraints so the middle of the head restraint is at the same height as the height of the top of the eyes.
B0701EU01
-
NEVER adjust the head restraint position of the driver’s seat when the vehicle is in motion.
-
Adjust the head restraint as close to the passenger’s head as possible. Do not use a seat cushion that holds the body away from the seatback.
-
Make sure the head restraint locks into position after adjusting it.
B0053KO24
When sitting on the rear seat, do not adjust the height of the head restraint to the lowest position.
When there is no occupant in the rear seats, adjust the height of the head restraint to the lowest position. The rear seat head restraint can reduce the visibility of the rear area.
To prevent damage, NEVER hit or pull on the head restraints.
B0701EU02
The driver’s and front passenger’s seats are equipped with adjustable head restraints for the passengers safety and comfort.
B0052KO13
Adjusting the height up and down
To raise the head restraint:
-
Pull it up to the desired position (1).
To lower the head restraint:
-
Push and hold the release button (2) on the head restraint support.
-
Lower the head restraint to the desired position (3).
B0052KO14
If you recline the seatback towards the front with the head restraint and seat cushion raised, the head restraint may come in contact with the sunvisor or other parts of the vehicle.
B0052KO15
B0052KO16
- : Manual seat
- : Power seat
Removal/Reinstall
To remove the head restraint:
-
Recline the seatback (2) with the seatback angle switch (1).
-
Raise the head restraint as far as it can go.
-
Press the head restraint release button (3) while pulling the head restraint up (4).
NEVER allow anyone to travel in a seat with the head restraint removed.
B0052KO18
B0052KO19
- : Manual seat
- : Power seat
To reinstall the head restraint:
-
Recline the seatback.
-
Put the head restraint poles (2) into the holes while pressing the release button (1).
-
Adjust the head restraint to the appropriate height.
-
Recline the seatback (4) with the seatback angle switch (3).
Always make sure the head restraint locks into position after reinstalling and adjusting it properly.
B0701EU03
*: If equipped
The rear seats are equipped with head restraints in all the seating positions for the passenger’s safety and comfort.
B0701EU04
Adjusting the height up and down
To raise the head restraint:
-
Pull it up to the desired position (1).
To lower the head restraint:
-
Push and hold the release button (2) on the head restraint support.
-
Lower the head restraint to the desired position (3).
B0701EU05
Removal/Reinstallation
To remove the head restraint:
-
Raise the head restraint as far as it can go.
-
Press the head restraint release button (1) while pulling the head restraint up (2).
To reinstall the head restraint:
-
Put the head restraint poles into the holes (3) while pressing the release button (1).
-
Adjust the head restraint to the appropriate height.
B0705EU01
The headrest will fold down automatically when folding the seatback.
To fold the headrest manually:
-
Pull the strap.
To unfold the headrest manually:
-
Raise the headrest manually.
Always be sure the headrest has locked into position after you return the seatback.
The height of the 3rd row headrests cannot be adjusted.
B0706EU01
While driving, the wing-out headrest supports the passenger’s head from shaking. Hold both ends of the wing-out headrest with your hands, and pull out or push in to adjust its position.
When the wing-out headrest is not in use, hold both ends of the headrest and pull out to return it to its original position.