+ -

Removable Towing Hook

2C_TowingHook

  1. Open the liftgate and remove the towing hook from the tool case.

  2. Remove the hole cover by pressing the lower part of the cover on the bumper.

  3. Install the towing hook by turning it clockwise into the hole until it is fully secured.

  4. Remove the towing hook and install the cover after use.

Make sure the towing hook is tightened properly. If not, during towing the towing hook may be thrown off the vehicle, resulting in serious injury or accident.

Failure to properly tighten the towing hook may result in vehicle damage and deformation of related parts.