HBA Operation

• After selecting High Beam Assist from the settings menu to operate HBA:

  • Place the headlight switch in the AUTO position and push the turn signal lever toward the instrument cluster. HBA Z indicator light illuminates.

  • When HBA is enabled, high beams turn on when the vehicle speed is above 20 mph (30 km/h) and the High Beam ] indicator light illuminates. When the vehicle speed is below 12 mph (20 km/h), high beams do not turn on and the indicator light illuminates in white.

• When HBA is operating:

  • If the turn signal lever is pulled toward you when the high beams are off, the high beams turn on. When you let go of the turn signal lever, HBA operates again.

  • If the turn signal lever is pulled toward you when the high beams are on by HBA, the low beams turn on and HBA turns off.

  • If the turn signal lever is pushed away from you, the high beams turn on and HBA turns off.

  • If the headlight switch is moved from AUTO to another position (headlight/position/off), the corresponding light turns on and HBA turns off.

• When HBA is operating, high beam switches to low beam if:

  • The headlights of an oncoming vehicle are detected.

  • The tail lights of a front vehicle are detected.

  • The headlight or tail light of a motorcycle or a bicycle is detected.

  • The surrounding ambient light is bright enough so high beams are not required.

  • Streetlights or other lights are detected.