RVM Malfunction and Limitations
When RVM malfunctions, the image on the screen may appear green, blue, or black.
When RVM is not working properly, or the screen flickers, or the camera image does not appear properly, have your vehicle inspected by an authorized HYUNDAI dealer.
-
When your vehicle is stopped for a long time in winter or your vehicle is parked in an indoor parking lot, the exhaust fumes may temporarily blur the image.
-
The screen may appear abnormally under the following circumstances:
-
When the liftgate is open
-
RVM uses the following sensor:
-
Wide-rear view camera (if equipped)
For more information, refer to Sensor Information.
When the rear wiper washer is operating, washer fluid is sprayed onto the lens of the wide-angle rear camera. This removes foreign particles, dust and other contaminants on the wide-angle rear camera to provide clearer camera footage.
-
The washer may not be able to remove all contaminants from the lens and water droplets may form on the lens, depending on the type of contaminants and the surrounding environment.
-
Refill the washer fluid if it has run out.
-
The wide-rear view camera does not cover the complete area behind the vehicle. The driver should always check the rear area directly through the inside rearview mirror and side view mirror before parking or backing up.
-
Always keep the camera lens clean. If the lens is blocked or covered, RVM may not operate normally. Do not clean with strong chemicals containing high alkaline or volatile organic solvents (for example, gasoline, acetone).
-
The perceived distance on the screen may differ from the actual distance as the RVM displays the calibrated video of the wide-rear view camera. Also, the parking guide lines may be different from the actual distance if the vehicle is tilted due to cargo load or position. Make sure to directly check the vehicle's surroundings for safety.
-
Driving with the liftgate open is abnormal. For your safety, be aware and drive safely.