Cluster Display Messages

Rotary gear shift dial warning messages

Press brake pedal to change gear

This message appears when the brake pedal is not depressed while shifting the gear.

Depress the brake pedal and then shift the gear.

Shift to P after stopping

This message appears when the gear is shifted to P (Park) while the vehicle is moving.

Stop the vehicle before shifting to P (Park).

Shifter system malfunction

This message appears when the transmission or the shift dial does not properly operate in the P (Park) position.

Have your vehicle inspected by an authorized HYUNDAI dealer.

Check shifter dial

This message appears when there is a malfunction with the rotary gear shift dial.

Have your vehicle inspected by an authorized HYUNDAI dealer.

Check P button

This message appears when there is a problem with the P button.

Have your vehicle inspected by an authorized HYUNDAI dealer.

Rotary shifter stuck

This message appears when the rotary gear shift dial does not return back to its normal position after rotating it.

Have your vehicle inspected by an authorized HYUNDAI dealer.

Transmission overheated warning

If the warning messages on the cluster continue to blink, contact an authorized HYUNDAI dealer.

Steep grade! Press brake pedal

This message appears when the vehicle is driving up hills or on steep grades.

If the vehicle is held or creeping forward on an incline by applying the accelerator pedal, the transmission may result in damage.

Press the brake pedal, if the messages appears on the cluster display.

Transmission temp. is high! Stop safely.

Repeated stop-and-go launches on steep grades, sudden take off or acceleration, or other harsh driving conditions may increase the transmission temperature.

If the transmission temperature is high, the self-protection mode warns you with a warning chime and message while the shift indicator on the cluster display blinks.

  • Move the vehicle to a safe location and shift the gear to P (Park) with the engine running. Wait until the transmission is sufficiently cooled down.

  • If you ignore this warning, you may experience abrupt shifts, frequent shifts, or jerkiness.

Transmission Hot! Park with engine on

If you continue to drive with an overheated transmission, the above warning message appears.

  • Move the vehicle to a safe location and shift the gear to P (Park) with the engine running. Wait until the transmission is sufficiently cooled down.

  • If the above warning message is displayed continuously, have you contact an authorized HYUNDAI dealer.

Transmission cooling. Park for 00 min.

If you move the vehicle to a safe location and shift the gear to P (Park) with the engine running, the above warning message appears.

  • Wait until the transmission is sufficiently cooled down.

Trans cooled. Resume driving.

This message appears when your vehicle can be driven.

Drive the vehicle smoothy as possible.