3rd Row Seat Adjustment (Power)

Forward and rearward adjustment

Press the 3rd row seat forward and rearward adjustment switch located on the left and right of the 3rd row side trim and cargo side trim.
When the adjustment is complete, release the switch.

Seatback angle adjustment

Press the 3rd row seat back angle adjustment switch located on the left and right of the 3rd row side trim.
Carefully lean back on the seat and adjust it to the desired position.
When the adjustment is complete, release the switch.

Walk-in switch

When folding and sliding the 2nd row seat to access the 3rd row, ensure the vehicle is completely stopped. Only operate the switch after any occupants or passenger of the 2nd row seat have disembarked. Do not press the button to fold the seat if someone is seated or disembarking from the 2nd row seat, as sudden seat movement may result in injury.

Tilting walk-in seat (7, 8-Seater, right side seat)

Never operate the walk‑in switch if the seat is occupied by any passenger or if any object, including a Child Restraint System, is present on the seat. The walk‑in feature is not intended to operate under these conditions. Before activating the walk‑in feature, the driver must ensure that the seat is completely unoccupied and free of all objects.

Store the 2nd row seat belts in the storage holder.
When you press and hold the walk-in switch at the top of the 2nd row seat seatback or on the outside of the seat, both the seat cushion and seatback tilt forwards and the seat moves.

2C_2ndSeatworkinSwitchBackTilt
Hold your seat and safely get into or out of the 3rd row seat.

Type A (7,8-seater, manual type): After entering or exiting the 3rd row seats, push the seat rearward and return the seatback to its original upright position.

Type B (7-seater, power type): After entering or exiting the 3rd row seats, return the seat cushion and seatback to the upright position by pressing the walk-in switch and pushing the forward/rearward switch and seatback control switch rearwards.

Type C (8-seater, power type): After entering or exiting the 3rd row seats, push the seats back and secure them. Then, press the walk-in switch and push the seatback control switch rearwards to raise the seatback to the upright position. Return the seat cushion to its original position, using the front lever.

Do not operate the walk-in function when the seatback of the 2nd row seats are folded.

Sliding walk-in seat (8-Seater, left side seat)

Store the 2nd row seat belt in the storage holder.
When you press and hold the walk-in switch at the top of the 2nd row seat seatback or on the outside of the seat, the seat moves forward.

If necessary, move the 2nd row seats forwards using the forward/reverse lever.

2C_2ndSeatWorkin_2
Hold the seat to safely get in or out of the 3rd row seat.

Type A (manual type): After entering or exiting the 3rd row seats, push the seat rearward, and return the seatback to its original upright position.

Type B (power type): After entering or exiting the 3rd row seats, push the seats back and secure them. Then, press the walk-in switch, push the seatback control switch rearwards to raise the seatback to the upright position, and then return the seat to its original position using the forward/reverse lever.

If a seat is located in the center of 7-seater, it moves together when using the seat adjustment of the 2nd row seat behind the driver seat.

Walk-in switch may not operate properly when:

When the 2nd row seat belt is fastened
When the vehicle is moving more than 1.8 mph (3 km/h)
When the gear is not in P (Park)

Emergency seat folding strap (8-Seater)

If the walk-in switch does not work, get out of the vehicle by pulling the seat folding strap in case of an emergency.

Manual adjustment: Pull the seat folding strap to fold 2nd row seats. Hold the seat and lower it safely.
Power adjustment: Pull the seat folding strap to move forward the 2nd row seats.

Never attempt to pull the strap while the 2nd row seat is occupied as the seat may suddenly move and cause the passenger on the seat to be injured. Use only the strap when the walk-in switch does not work.