+ -

SEA Malfunction and Limitations

SEA malfunction

When SEA or a related component malfunctions, a warning message, the Master X warning light appears on the instrument cluster. When the detecting sensors are obscured, the system may be temporarily limited or disabled. The system operates properly when foreign material is removed from the sensors. If the system does not operate properly after it is removed, have your vehicle inspected by an authorized HYUNDAI dealer.

For more information, refer to Driver Assistance System Warnings and Indicators.

Turn off SEA when a trailer, carrier, or another attachment is installed. Remove the trailer, carrier, or another attachment to use SEA.

Detecting sensors

SEA uses the following sensor:

  • Rear corner radar

For more information, refer to Sensor Information or Blind-Spot Collision-Avoidance Assist (BCA).

Turn off SEA to install or remove a trailer, carrier, or another attachment. Turn on SEA when finished.

SEA limitations

SEA may not operate properly, or it may operate unexpectedly under the following circumstances:

  • Getting out of the vehicle where trees or grass are overgrown

  • Getting out of the vehicle where the road is wet

  • The approaching vehicle is very fast or very slow

  • SEA may not operate properly if interfered by strong electromagnetic waves.

  • SEA may not operate for about 3 seconds after the vehicle is started or the rear corner radars are initialized.

  • If the vehicle is turned off and restarted while the radar is blocked or malfunctioned, the condition is maintained. Therefore, SEA may not operate properly.