Power Adjustment

The front seat can be adjusted by using the control switches located on the outside of the seat cushion.

Never allow children to remain in the vehicle unattended. The power seats are operable when the vehicle is turned off.

To prevent damage to the seats:

Always stop adjusting the seats when the seat has been adjusted as far forward or rearward as possible.
Do not adjust the seats longer than necessary when the vehicle is turned off. This may result in unnecessary battery drain.
Do not operate two or more seats at the same time. This may result in an electrical malfunction.

Forward and rearward adjustment

Push the control switch forward or rearward to adjust the seat to the desired position.

Seatback angle adjustment

Push the control switch forward or rearward to adjust the seatback angle.

Leg support adjustment

Push the control switch forward to raise the leg support.
Push the control switch rearward to lower the leg support.

When lowering or raising the Leg support, be careful not to have your hands or legs caught under the front seats or other surrounding parts of the Leg support. Unexpected injuries may occur.
Do not allow children to adjust the switch. Unexpected injuries may occur.
Make sure that the leg support do not interfere with each other while adjusting. The body parts or objects may be damaged if it is caught in the interference.

Do not sit or place heavy objects on the Leg support. It may damage the system.

The driver's leg support can be raised only when the gear is in P (Park) or when the vehicle speed is below 3 mph (5 km/h).

Seat cushion tilt/Seat height adjustment

Push the front or rear portion of the control switch up or down to control the seat cushion angle or height.

Lumbar support

Press the front or rear portion of the switch to increase or decrease lumbar support.

Press the front or rear portion of the switch to increase or decrease lumbar support.

Press the top or bottom portion of the switch to move the support position up or down.

Do not continue to operate the lumbar support when the lumbar support provides its maximum support. Damage to the lumbar support motor could occur.

Seat bolster

Push the adjustment lever clockwise, the seatback bolster is adjusted inward. Push the lever counterclockwise, the seatback bolster is adjusted outward.
Release the lever once the bolster reaches the desired position.

Seat cushion support

Push the control switch up to increase cushion support.
Push the control switch down to decrease cushion support.

Relaxation comfort seat (Driver's seat)

Relaxation comfort seats help distribute body pressure and concentrated weight on specific body parts that occur while sitting in the same position for a long period of time. The seat helps relieve fatigue and discomfort by providing the optimal sit position.

Take the following precautions when using the relaxation comfort seat:

Do not use the relaxation comfort seat while the vehicle is moving. Using the comfort seat could increase the risk of injuries in the event of a collision or sudden stop.
Do not use the relaxation comfort seat when the luggage or other objects are placed at the rear seat.
Do not use the relaxation comfort seat while the vehicle is moving. Seat belts may not operate normally due to the lack of adherence between the shoulder belts and the body.
Do not use the relaxation comfort seat when the rear seats are not in the rearmost position and upright.

Press the auto return button to return to the original seat position after operating the relaxation comfort seat.

Using the seat adjustment switch other than the auto return button may restrict the downward cushion movement.

Using the relaxation comfort seat

Stop the vehicle and shift to P (Park).
Press and hold the rear portion of the Relaxation mode switch with the Start/Stop button in the POWER ON or DRIVE REDAY position.
- The steering wheel height (Driver's seat), seat position, seatback angle, leg support angle and seat cushion height moves to the relaxation position.

When relaxation comfort seat is activated, the seat cushion, seat cushion extension (if equipped), and seatback angle are adjusted automatically.
If the relaxation mode is operated unintentionally, use the seat adjustment switches to deactivate or control the seat.

Returning to the original seat position

Press and hold the front portion of the Relaxation mode switch to return the seat to the original position.

The driver seat returns to the original position when the gear was in P (Park).

In the following situation, the relaxation comfort seat does not return to the original position.

When the gear is not in P (Park)
When the vehicle speed is above 1.8 mph (3 km/h)
When the driver's seat Integrated Memory System is reset (if equipped)

Do not use the seat switches simultaneously. It may damage the seat system.

When relaxation comfort seat cannot be operated, reset the Integrated Memory System. If relaxation comfort seat does not operate even after resetting the Integrated Memory System, contact an authorized HYUNDAI dealer.

Resetting the Relaxation mode

For more information, refer to the Integrated Memory System (IMS).

If resetting stops before the process is complete, restart the resetting procedure. The use of Relaxation mode may be limited if resetting has not been completed.

After resetting is completed, adjust the seat to the desired position.

Ergo-motion seat (Driver's seat)

Select Setup > Vehicle > Seats > Ergo-Motion Seat from the infotainment system's Settings menu to select and set up supplemental functions.

Before actually using each function, try the functions with the vehicle parked.

Comfortable stretch

Comfortable stretch is a function that helps relieve fatigue of the pelvis and lower back due to driving.

Every time you press the button, you may select a mode or turn off the function in the following order.

Pelvic stretching: The cushion portion moves, helping the left and right movement of the pelvis.
Lumbar stretching: The seatback portion moves, helping back and forth movement of the lower back.
Whole Body stretching: The cushion and seatback moves in sequence, helping the whole body reduce fatigue.
Off: Turns off Comfortable Stretch.

Also, you can change the operation intensity and operation time from the Settings menu in the infotainment system.

Intensity: Setup > Vehicle > Seats > Ergo-Motion Seat > Comfortable Stretch > Intensity > Strong/Normal
Time: Setup > Vehicle > Seats > Ergo-Motion Seat > Comfortable Stretch > Session Length > Long (20 min)/Medium (15 min)/Short (10 min)

Smart posture assist

After driving for an hour, Smart Posture Assist automatically adjusts the pelvis and back portion of the seat to assist the posture.

You can activate or deactivate Smart Posture Assist function from the Settings menu in the infotainment system. Select:

Setup > Vehicle > Seats > Ergo-Motion Seat > Smart Posture Assist

Smart support

The seat bolster support increases when SPORT mode is selected for Drive Mode and when driving at high speed.

You can activate or deactivate Smart Support function from the Settings menu in the infotainment system. Select:

Setup > Vehicle > Seats > Ergo-Motion Seat > Smart Support

Walk-in switch

Passengers may use the switches to control the front passenger seat.

Press the front or rear portion of the switch to move the seat forward, rearward or adjust the seatback angle.

Do not adjust the front seat when a passenger is getting on or off the vehicle.

Seatback pocket

The seatback pocket is provided on the back of the front seatbacks.

Do not put heavy or sharp objects in the seatback pockets. In an accident they could come loose from the pocket and injure occupants.