i-Pedal

i-Pedal is controlled by acceleration pedal. i-Pedal provides vehicle speed control (acceleration/deceleration, stopping) without manually controlling the paddle shifter.

To operate:

• Pull the left side paddle shifter at level 3 regenerative braking system.

• During the activation of i-Pedal, the vehicle is stopped when the vehicle speed is less than 1 mph (3 km/h) even if the brake pedal is not pressed.

• When you press the accelerator pedal at the same time during one-pedal driving by pulling the left paddle shift lever, the vehicle cannot be stopped.

To deactivate:

• The i-Pedal is deactivated when the driver turns off the vehicle. When the vehicle is turned on, the regenerative braking is set to be on level 3.

• The i-Pedal is turned off and the regenerative braking changes to level 3 when the gear is shifted to R.

Limitations

The vehicle may move even if one pedal driving is normally operated. Therefore, the driver should be careful to stop the vehicle by this function under circumstances as follows:

• Driving on icy, snowy, wet, sandy, muddy roads, manhole/pit hole surfaces

• Wheels not aligned

• Conditions in which wheel slip or spin occurs

• On heavy loading

• By leaning left of right

• Under bad tire wear

• Driving uphill or downhill

• Driving where the slope starts or ends

• By repeating stop and go on ramp