Smart regeneration system On/Off

Operate the paddle shifter as shown below to use the smart regeneration system.

• Turning on the smart regeneration system: Whilst the ¢ indicator is ON, shift the gear to D (Drive), and pull and hold the right paddle shifter (²) for over a second.

Type A

2C_RegenerationBrakeLevel_2

Type B

2C_RegenerationBrakeLevel

The smart regeneration system is ON and the regenerative braking level is displayed as 'AUTO'.

• Turning off the smart regeneration system: Whilst the smart regeneration system is ON, pull and hold the right paddle shifter (²) for over a second. The instrument cluster will display the regenerative braking level instead of 'AUTO', and the smart regeneration system turns off.

• Using one pedal driving: Whilst the smart regeneration system is ON, pull and hold the left paddle shifter (°) for over 0.5 seconds (For more information, refer to the "One Pedal Driving" section in this chapter.)

i-PEDAL is not available whilst the smart regeneration system is ON. Turn off the smart regeneration system first before using i-PEDAL.