Navigation-based Smart Cruise Control operation
Navigation-based Smart Cruise Control is ready to operate if all of the following conditions are satisfied:
-
Select "Highway Auto Speed Change" from the infotainment system.
-
Smart Cruise Control is operating
-
Driving on main roads of highways (or motorways)
For more information on how to operate Smart Cruise Control, refer to the "Smart Cruise Control (SCC)" section in this chapter.
When Navigation-based Smart Cruise Control operates, it will be displayed on the instrument cluster as follows:
2C_NSCCOperatingInfo
Navigation-based Smart Cruise Control standby
If the operating conditions are satisfied, the green
Navigation-based Smart Cruise Control operating
Whilst the speed is being controlled, the green
Temporarily cancelled or interrupted by the driver
If Navigation-based Smart Cruise Control cannot control the vehicle, such as when Smart Cruise Control is temporarily cancelled or the navigation system is searching for a route, the grey
When the driver depresses the accelerator pedal, the white
2C_NSCCDriveCarefullyInfo
"Drive carefully" warning message will appear in the following circumstances:
-
Navigation-based Smart Cruise Control is not able to slow down your vehicle to a safe speed
The images and colours in the instrument cluster may differ depending on the cluster type or theme selected in the infotainment system.
Highway Curve Zone Auto Slowdown
-
Depending on the curve ahead on the highway (or motorway), the vehicle will decelerate, and after passing the curve, the vehicle will accelerate to Smart Cruise Control set speed.
-
Vehicle deceleration time may differ depending on the vehicle speed and the degree of the curve on the road. The higher the driving speed, deceleration will start faster.