Tires and Wheels
|
Items |
Tire size |
Wheel size |
Inflation pressure psi (kPa) |
Wheel lug nut torque lbf·ft (kgf·m, N·m) |
|||||
|
Normal load (less than 100 mph (160 km/h)) |
High-speed driving (Over 100 mph (160 km/h))*1 |
Track driving*2 |
|||||||
|
Front |
Rear |
Front |
Rear |
Front |
Rear |
||||
|
Full size tire |
275/35ZR21 |
9.5J X 21 |
35 (240) |
36 (250) |
35 (240) |
36 (250) |
35 (240) |
35 (240) |
130-145 (18-20, 176-196) |
Must drive only where the speed is legal
Refers to the recommended inflation pressure for the hot tire condition (state when the tire temperature in increased). Limited number of passengers is 2 with no luggage. After the track driving is complete, change to the appropriate tire inflation recommended for the normal road and driving condition.
-
It is permissible to add 3 psi (20 kPa) to the standard tire pressure specification if colder temperatures are expected soon. Tires typically lose 1 psi (7 kPa) for every 12 °F (7 °C) temperature drop. If extreme temperature variations are expected, recheck your tire pressure as necessary to keep them properly inflated.
-
Tire inflation pressures may vary depending on changes in elevation (about 1.4 psi (10 kPa) for every 1 mi. (1 km) elevation change). If driving in areas of higher or lower elevation, be sure to check and adjust for proper tire inflation.
-
Do not exceed the maximum inflation pressure, as found on the sidewall of the tire(s).
When replacing tires, ALWAYS use the same size, type, brand, construction and tread pattern supplied with the vehicle. If not, it can damage the related parts or make it work irregularly.