System malfunction and limitations
2C_DriverAssistanceMalfunction
When Intelligent Front-Lighting System does not work properly, the "Check Driver Assistance system." warning message may appear for a few seconds on the instrument cluster. After the message disappears, the AFS and
2C_DriverAssistanceLimitedCamera
When the front view camera is covered or blocked, the Intelligent Front-Lighting System may temporarily not work properly. The "Driver Assistance system limited. Camera obscured." warning message may appear on the instrument cluster.
The system operates normally when such foreign material is removed.
-
Intelligent Front-Lighting System may not operate properly even if there is no warning message or warning light on the instrument cluster.
-
Intelligent Front-Lighting System may not operate properly in open areas where no objects are detected (for example, empty parking lot) or when the detecting sensors are blocked right after turning on the engine.
Intelligent Front-Lighting System may not operate normally:
-
The headlights from an oncoming or front vehicle is damaged or out of the detection range.
-
The headlights from an oncoming or front vehicle are covered with dust, snow, or water.
-
An oncoming or front vehicle’s headlights are off but the fog lights are on.
-
There are lights that have a similar shape as a vehicle’s light ahead.
-
The headlights are not repaired or replaced properly.
-
The headlights are not aimed properly.
-
You are driving on a narrow curved road, rough road, uphill, or downhill.
-
A front vehicle is partially visible on a crossroad or curved road.
-
There is a traffic light, reflecting sign, LED sign, or reflectors ahead.
-
There is a temporary reflector or flash ahead (construction area).
-
The road is wet or covered with snow or ice.
-
A vehicle suddenly appears from a curve.
-
The vehicle is tilted due to a flat tire or being towed.
-
There are many street lights or the ambient light is bright.
-
Light from another vehicle is not detected because of exhaust fumes, smoke, fog, snow, etc.
-
The front windshield is covered with foreign material.
-
Always check road conditions, and if necessary, take appropriate actions to drive safely. It is your responsibility to operate your vehicle in a safe manner.
-
If Intelligent Front-Lighting System does not operate properly, use the turn signal lever to switch between high beam and low beam.
To prevent damage:
-
Never disassemble the camera sensors or camera sensor assemblies.
-
Only have the detecting sensor replaced or repaired by an authorized HYUNDAI dealer.
-
Never install any accessories, stickers, or tint the front windshield.
-
Always keep the camera dry.
-
Never place any reflective objects (for example, white paper, mirror) on the dashboard.
-
Do not use any cleanser containing acid or alkaline detergents when cleaning the camera lenses. Use only a mild soap or neutral detergent, and rinse thoroughly with water.