Power windows
The ignition switch must be in the ON position to be able to raise or lower the windows. Each door has a Power Window switch to control the door's window. The driver has a Power Window Lock button that can block the operation of rear passenger windows. The power windows will operate for about 3 minutes after the ignition is turned LOCK/OFF or if the ignition is placed in the ACC position, as long as the front doors remain closed.
If the front doors are opened, the battery power is turned OFF and the Power Windows do not operate.
OCN7050082
To open:
Press the window switch down to the first detent position (5). Release the switch when you want the window to stop.
To close:
Pull the window switch up to the first detent position (5). Release the window switch when you want the window to stop.
Pressing the power window switch momentarily to the second detent position (6) completely lowers the window even when the switch is released.
To stop the window at the desired position while the window is operating, pull up or press down and release the switch.
Pressing or pulling up the power window switch momentarily to the second detent position (6) completely lowers or lifts the window even when the switch is released. To stop the window at the desired position while the window is operating, pull up or press down and release the switch.
If the power windows do not operate normally, the automatic power window system must be reset as follows:
-
Place the ignition switch to the ON position.
-
Close the window and continue pulling up on the power window switch for at least one second.
If the power windows do not operate properly after resetting, contact an authorized HYUNDAI dealer.
OCN7050026
If a window senses any obstacle while it is closing automatically, it stops and lowers approximately 12 in. (30 cm) to allow the object to be cleared.
If the window detects any resistance while the power window switch is pulled up continuously, the window stops upward movement and then lowers approximately 1 in. (2.5 cm).
If the power window switch is pulled up continuously again within 5 seconds after the window is lowered by the automatic window reverse feature, the automatic window reverse does not operate.
The automatic reverse feature is active only when the "Auto Up" feature is used by fully pulling up the switch to the second detent.
Do not install any accessories on the windows. The automatic reverse feature may not operate.
Make sure body parts or other objects are safely out of the way before closing the windows to avoid injuries or vehicle damage.
Objects less than 0.16 in. (4 mm) in diameter caught between the window glass and the upper window channel may not be detected by the automatic reverse window and the window does not stop and reverse direction.
OCN7050027
The driver can disable the power window switches on the rear passenger doors by pressing the power window lock button.
When the power window lock button is pressed:
-
The driver's master control can operate all the power windows.
-
The front passenger's control can operate the front passenger's power window.
-
The rear passenger's control cannot operate the rear passengers' power window.
Do not allow children to play with the power windows. Keep the driver's door power window lock button in the LOCK position. Serious injury or death may result from unintentional window operation by a child.
-
To prevent possible damage to the power window system, do not open or close two windows or more at the same time. This also ensures the longevity of the fuse.
-
Never try to operate the main switch on the driver's door and the individual door window switch in opposite directions at the same time. If this is done, the window stops and cannot be opened or closed.
Press and hold the Door Unlock (
) button on the smart key for more than 3 seconds and the front seat windows move down after the doors are unlocked. Window movement stops when you release the door unlock button.
Do not leave the windows down when leaving the vehicle to prevent theft or damage from water entering the vehicle.
-
The remote window opening function may abruptly stop, when you move away from your vehicle during operation. Stay in close proximity from your vehicle, while monitoring the window movement.
-
The doors unlock when the windows are opened using the remote window opening function.