+ -

System operation

Cooling/Ventilation

  1. Set the mode to the Æ position.

  2. Set the air intake control to the outside (fresh) air position.

  3. Set the temperature control to the desired position.

  4. Set the fan speed control to the desired speed.

Heating

  1. Set the mode to the Å position.

  2. Set the air intake control to the outside (fresh) air position.

  3. Set the temperature control to the desired position.

  4. Set the fan speed control to the desired speed.

  5. If desired, turn the air conditioning ON with the temperature set to high in order to dehumidify the air before it enters into the cabin.

If the windscreen fogs up, set the mode to Ç position.

Operation Tips

  • To keep dust or unpleasant fumes from entering the vehicle through the ventilation system, temporarily set the air intake control to the recirculated air position. Be sure to return the control to the fresh air position when the irritation has passed to keep fresh air in the vehicle. This can help keep the driver alert and comfortable.

  • To help prevent interior fog on the windscreen, set the air intake control to the fresh air position and the fan speed to the desired position, turn on the air conditioning system, and adjust the temperature control to the desired temperature.

Air conditioning

Your Hyundai vehicle air conditioning system is filled with R-134a or R-1234yf refrigerant.

  1. Start the vehicle. Press the air conditioning button.

  2. Set the mode to the Æ position.

  3. Set the air intake control to outside air or recirculated air position.

  4. Adjust the fan speed control and temperature control as desired.

When maximum cooling is desired, set the temperature control to the lowest position, then set the fan speed control to the highest setting.

Air conditioning system operation tips

  • If the vehicle has been parked in direct sunlight during hot weather, open the windows for a short time to let the hot air inside the vehicle escape.

  • After sufficient cooling has been achieved, switch back from recirculated air position to the fresh outside air position.

  • To help reduce moisture inside of the windows on rainy or humid days, decrease the humidity inside the vehicle by operating the air conditioning system with the windows and sunroof closed.

  • Use the air conditioning system every month only for a few minutes to ensure maximum system performance.

  • If you operate air conditioner excessively, the difference between the temperature of the outside air and that of the windscreen may cause the outer surface of the windscreen to fog up, causing loss of visibility. In this case, set the mode selection to the Æ position and fan speed control to the lowest speed.