Warning and Indicator Lights
If the warning light illuminates while driving or does not go off, have your vehicle inspected by an authorized HYUNDAI dealer.
(1) |
|
(2) |
|
(3) |
|
(4) |
|
(5) |
|
(6) |
|
(7) |
|
(8) |
|
(9) |
|
(10) |
|
(11) |
|
(12) |
|
(13) |
|
(14) |
|
(15) |
|
(16) |
|
(17) |
|
(18) |
|
(19) |
|
(20) |
|
(21) |
|
(22) |
|
(23) |
|
(24) |
|
(25) |
|
(26) |
|
(27) |
|
(28) |
|
(29) |
|
(30) |
|
(31) |
|
(32) |
|
(33) |
|
(34) |
|
(35) |
|
This warning light illuminates:
When the seat belt is not fastened.
For more information, refer to Seat Belts.
This warning light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for 3-6 seconds and then goes off.
-
When there is a malfunction with the Safety Restraint System (SRS).
If the Airbag warning light remains illuminated while driving, have your vehicle inspected by an authorized HYUNDAI dealer.
This warning light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off once the parking brake is released.
-
Whenever the parking brake is applied.
-
Whenever the regenerative brake does not operate.
-
Whenever the brake fluid level in the reservoir is low.
-
If the warning light illuminates with the parking brake released, it indicates the brake fluid level in the reservoir is low.
-
With the engine stopped, check the brake fluid level immediately and add fluid as required. (For more information, refer to Brake Fluid.) If a brake fluid leak is found, or if the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have your vehicle inspected by an authorized HYUNDAI dealer.
-
If the parking brake warning light illuminates with the parking brake released, it indicates that the brake fluid level is low. Have your vehicle inspected by an authorized HYUNDAI dealer.
If your vehicle is equipped with the dual-diagonal braking system, this means you still have braking on two wheels even if one of the dual systems should fails.
-
With only one of the dual systems working, more than normal pedal travel and greater pedal force are required to stop the vehicle. Also, the vehicle does not stop in a short distance if only a portion of the braking system is working.
-
If you experience a malfunction with the braking system while driving, attempt to slow your vehicle by coasting or by using engine braking. You may be able to reduce your vehicle speed by manually downshifting to a lower gear.
This warning light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Whenever there is a malfunction with the ABS.
The hydraulic braking system still operates even if there is a malfunction with the ABS. If the ABS warning light remains illuminated while driving, have your vehicle inspected by an authorized HYUNDAI dealer.
These two warning lights illuminate at the same time while driving:
When the ABS and brake system does not work normally.
If both warning lights remain illuminated while driving, have your vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
-
When both ABS and Parking brake warning lights are on, the braking system does not work normally and you may experience an unexpected and dangerous situation during sudden braking.
-
Avoid high speed driving and abrupt braking.
-
Have your vehicle inspected by an authorized HYUNDAI dealer.
When the ABS warning light is on or both ABS and Parking brake warning lights are on, the speedometer, odometer, or tripmeter may not work. Also, the Motor Driven Power Steering (MDPS) warning light may illuminate and the steering effort may increase or decrease.
This warning light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Whenever there is a malfunction with the MDPS.
If the MDPS warning light remains illuminated while driving, have your vehicle inspected by an authorized HYUNDAI dealer.
This warning light illuminates:
When the fuel tank is nearly empty.
Refuel the vehicle as soon as possible.
Driving with the Low fuel level warning light on or with the fuel level below E (Empty) may cause the engine to misfire and damage the catalytic converter (if equipped).
This warning light illuminates:
When the engine oil pressure is low.
-
Turn the engine off and check the engine oil level. (For more information, refer to Engine Oil.) If the level is low, add oil as required. If the warning light remains on after adding oil or if oil is not available, have your vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
-
Continued driving with the warning light on may cause engine failure.
-
If the engine is not stopped immediately after the Engine oil pressure warning light is illuminated, severe damage could result.
When engine oil pressure decreases due to insufficient engine oil, etc., the Engine oil pressure warning light illuminates. In addition, the enhanced engine protection system that limits engine power is activated. When the engine oil pressure is restored, the warning light and the enhanced engine protection system will turn off after the engine is restarted.
This indicator light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Whenever there is a malfunction with either the emission control system or the engine or the vehicle powertrain.
If the MIL warning light remains illuminated while driving, have your vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
-
If the enhanced engine protection system activates due to the lack of engine oil, the engine power is limited.
-
Driving with the MIL on may cause damage to the emission control system that may affect drivability and/or fuel economy.
-
If the MIL illuminates, catalytic converter (if equipped) or potential catalytic converter damage is possible that may result in loss of engine power.
This warning light illuminates:
When there is a malfunction with either the alternator or electrical charging system.
-
Turn the engine off and check the alternator drive belt for looseness or breakage. If the belt is adjusted properly, there may be a problem in the electrical charging system.
If the Charging system warning light remains illuminated while driving, have your vehicle inspected by an authorized HYUNDAI dealer.
This warning light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
When one or more tires are significantly under-inflated.
This warning light remains ON after blinking for about 60 seconds, or repeatedly blinks ON and OFF at 3 second intervals:
When there is a malfunction with the TPMS.
If this occurs, have your vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
For more information, refer to Tire Pressure Monitoring System (TPMS).
-
The TPMS cannot alert you to severe and sudden tire damage caused by external factors.
-
If you notice any vehicle instability, immediately take your foot off the accelerator pedal, apply the brakes gradually with light force, and slowly move to a safe position off the road.
This warning light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Whenever there is a malfunction with EPB.
If the EPB warning light remains illuminated while driving, have your vehicle inspected by an authorized HYUNDAI dealer.
The EPB warning light may illuminate when the Electronic Stability Control (ESC) indicator light comes on to indicate that ESC is not working properly. This does not indicate malfunction of EPB.
This indicator light illuminates:
-
White: When you activate Auto Hold by pressing the AUTO HOLD switch.
-
Green: When you stop the vehicle completely by depressing the brake pedal with Auto Hold activated.
-
Yellow: Whenever a malfunction with the Auto Hold is detected.
If the AUTO HOLD indicator light remains yellow while driving, have your vehicle inspected by an authorized HYUNDAI dealer.
For more information, refer to Electronic Parking Brake (EPB).
This indicator light illuminates:
Whenever there is a malfunction with the 4WD system.
If this occurs, have your vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
For more information, refer to Four Wheel Drive (4WD).
For more information, refer to 'Four Wheel Drive (4WD)' section in chapter 6 of the complete Owner's Manual.
This warning light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Yellow: When Forward Safety of Forward Collision-Avoidance Assist (FCA) is deselected, disabled, or a malfunction is detected.
If the yellow warning light remains on after the sensor has been uncovered or unblocked when the Forward Safety is set, have your vehicle inspected by an authorized HYUNDAI dealer.
This warning light blinks:
Red: When Forward Safety or Forward Cross-Traffic Safety function is operating.
For more information, refer to Forward Collision-Avoidance Assist (FCA).
This warning light illuminates:
-
When you set the Engine Start/Stop button to the ON position, the yellow warning light illuminates for about 3 seconds and then goes off.
-
Continuously Yellow: When Forward/Side Safety is deselected or FCA is disabled or a malfunction is detected.
If the yellow warning light is still on even after removing foreign material from the front of the sensors after Forward Safety select in settings, have your vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
This warning light blinks:
Red: When Forward/Side Safety of FCA is operating.
For more information, refer to Forward Collision-Avoidance Assist (FCA).
This indicator light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Gray: When Lane Keeping Assist (LKA) operating conditions are not satisfied.
-
Green: When LKA operating conditions are satisfied.
-
Yellow: When Lane Safety is deselected, disabled, or a malfunction is detected.
If the yellow warning light remains on after the sensor has been uncovered or unblocked when Lane Safety is set, have your vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks:
Green: When LKA is operating.
For more information, refer to Lane Keeping Assist (LKA).
This indicator light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Green: When LFA is operating.
-
Gray: When LFA operating conditions are not satisfied.
This indicator light blinks:
White: When the steering wheel assist is cancelled.
For more information, refer to Lane Following Assist (LFA).
This indicator light illuminates:
When the speed limiter is enabled.
For more information, refer to Manual Speed Limit Assist (MSLA).
This indicator light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Yellow: When ISLA is disabled, the front view camera is blocked, or a malfunction is detected.
If the yellow indicator light remains on after the front view camera has been uncovered or unblocked, have your vehicle inspected by an authorized HYUNDAI dealer.
For more information, refer to Intelligent Speed Limit Assist (ISLA).
This indicator light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Yellow: When Driver Attention Warning (DAW) is disabled or a malfunction is detected.
If the yellow indicator light remains on after the front view camera has been uncovered or unblocked, have your vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks:
Yellow: When the inattentive driving warning is operating.
For more information, refer to Driver Attention Warning (DAW).
This warning light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Red: When Forward Attention Warning is disabled or a malfunction is detected.
If the red warning light remains on after the in-cabin camera has been uncovered or unblocked, have your vehicle be inspected by an authorized HYUNDAI dealer.
This warning light blinks:
Red: Forward Attention Warning warns the driver to keep eyes on the road.
For more information, refer to Forward Attention Warning (FAW).
This warning light illuminates:
When there is a malfunction in operation in any of the following systems:
-
FCA malfunction or radar blocked
-
Blind-Spot Collision-Avoidance Assist (BCA) malfunction or radar blocked
-
Exterior light malfunction
-
Rear Cross-Traffic Collision-Avoidance Assist (RCCA) malfunction or radar blocked
-
LED headlight malfunction
-
High Beam Assist (HBA) malfunction
-
Smart Cruise Control (SCC) malfunction or radar blocked
-
LFA malfunction
-
Door/Liftgate malfunction
-
Low washer fluid
-
Four Wheel Drive (4WD) malfunction (if equipped)
-
Tire Pressure Monitoring System (TPMS) malfunction
If the issue is resolved, the Master warning light turns off.
This warning light illuminates:
Whenever there is a malfunction with a LED headlight.
If the LED headlight warning light remains illuminated while driving, have your vehicle inspected by an authorized HYUNDAI dealer.
This warning light blinks:
Whenever there is a malfunction with a LED headlight related part.
If this occurs, have your vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
Driving with the LED headlight warning light on or blinking may reduce LED headlight life.
This indicator light illuminates:
-
When you set the Engine Start/Stop button to the ON position. It illuminates for about 3 seconds and then goes off.
-
Green: When you activate the system by pressing the DBC button.
-
Yellow: Whenever a malfunction with the DBC system is detected.
If the yellow indicator light remains on, have your vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks:
Green: When DBC system is operating.
For more information, refer to Downhill Brake Control (DBC).
For more information, refer to 'Downhill Brake Control (DBC)' section in chapter 6 of the complete Owner's Manual.
This indicator light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
Whenever there is a malfunction with ESC system.
If this occurs, have your vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
This indicator light blinks:
While ESC is operating.
For more information, refer to Electronic Stability Control (ESC).
This indicator light illuminates:
-
When the Engine Start/Stop button is in the ON position. It illuminates for about 3 seconds and then goes off.
-
When you deactivate ESC system by pressing the ESC OFF button.
For more information, refer to Electronic Stability Control (ESC).
This indicator light illuminates for up to 30 seconds:
When the vehicle detects the smart key in the vehicle with the Engine Start/Stop button in the ACC or ON position.
This indicator light blinks for a few seconds:
When the smart key is not in the vehicle, you cannot start the engine.
This indicator light illuminates for a few seconds and goes off:
If the smart key is in the vehicle and the Engine Start/Stop button is ON, but the vehicle cannot detect the smart key.
Have your vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks:
Whenever there is a malfunction with the immobilizer system.
Have your vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks:
When you operate the turn signal lever.
If the turn signal indicator light does not blink, blinks rapidly, or does not illuminate, have your vehicle inspected by an authorized HYUNDAI dealer.
This indicator light illuminates:
When the headlights are on.
This indicator light illuminates:
-
When the headlights are on and the turn signal lever is moved to the high beam position.
-
When the turn signal lever is pulled into the Flash-to-Pass position.
This indicator light illuminates:
When the high beam is on with the light switch in the AUTO position.
-
White: When HBA is ready to operate.
-
Green: When HBA is operating.
If your vehicle detects oncoming or preceding vehicles, HBA switches the high beam to low beam automatically.
For more information, refer to High Beam Assist (HBA).
This indicator light illuminates:
To warn the driver the road may be icy.
When the outside temperature on the temperature gauge is below 40 °F (4 °C), a single chime sounds, both the outside temperature gauge and Icy road warning indicator blink several times, and then they remain illuminated.
You can activate or deactivate the Icy road warning function from the Settings menu in the infotainment system. Select Setup > Cluster/Head-Up Display > Cluster > Content Selection > Icy Road Warning.
If the Icy road warning light appears while driving, avoid speeding, rapid acceleration, sudden braking, or sharp turning.
The infotainment system may change after software updates. For more information, refer to the user's manual provided in the infotainment system and the quick reference guide.
This indicator light illuminates:
When the parking lights or headlights are on.
This indicator light illuminates:
When any door or the liftgate is left open.
Before driving the vehicle, confirm the doors and liftgate are fully closed.